PLEASE CALL 1-888-755-4497 BEFORE RETURNING TO THE STORE.
WWW.SMART-POND.COM
WARNINGS AND CAUTIONS – PUMP
WARNING
•
Risk of electrical shock. This pump is supplied with a grounding conductor and grounding–type
attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly
grounded, grounding-type receptacle.
•
Do not exceed the voltage shown on the pump.
•
Always disconnect pump from the power source before beginning any maintenance or work on the
pump.
•
Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly if
damage is found.
•
Do not remove the grounding pin from the power cord plug.
•
Risk of electrical shock: This pump has not been investigated for use in swimming pools or marine
areas.
CAUTION
•
This pump has been evaluated for use with fresh water only.
•
Use a proper power source as indicated on the pump label.
•
Keep the cord away from high temperatures or other heat sources.
•
Do not pump heated liquids.
•
Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
•
Operate in fresh water only. Avoid heavily chlorinated water and water with high pH levels.
•
Do not lift the pump by its power cord.
WARNINGS AND CAUTIONS – ILLUMIFALLS SPILLWAY
WARNING
•
To reduce the risk of electrical shock, connect only to a properly grounded, grounding type receptacle.
•
Do not exceed the input voltage shown on the transformer.
•
Do not submerge the transformer.
•
To reduce the risk of fire or injury, keep lamp away from materials that may burn.
•
Always disconnect light from the power source before beginning any maintenance or work on the light.
•
Inspect cord for damage before installation and/or maintenance. Replace the entire light/transformer
assembly if damage is found.
CAUTION
•
Use a proper power source as indicated on the transformer label.
•
Keep the cord away from high temperatures or other heat sources.
•
Do not lift the light or the transformer by its power cord.
•
This light assembly is not intended for use in swimming pools or hot tubs.
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
•
Estimated Assembly Time: 1.5 hours
•
Tools required for assembly: hammer, chisel, flathead screwdriver, hacksaw, heavy duty scissors.
•
For retangular paver stone arrangements: Do not exceed the dimensions 7-ft. L x 4-ft. W x 1-ft. H.
•
For half round paver stone arrangements: Do not exceed the dimensions 7-ft. L x 4-ft. W x 1-ft. H.
•
For circular paver stone arrangements: Do not exceed the dimensions 4-ft. diameter x 1-ft. H.
