Place the Marking Gauge over the Tube,
using the guideline. Mark a line on the
Larger Tube and the Smaller Tube .
1
2
Visit www.smartlockfitting.com for video guide
Union Reducer
Model Type Code: UNRD
4
Remove the Larger Positioning Strip.
3
Ensure the marked line is visible on
the Larger Tube.
1
2
Insert the Larger Tube into the
Larger Nut until the Tube stops.
*Must start with the Larger Tube.
1
1
2
Installation Guide
214-304-2083
www.smartlockfitting.com
1. CLOSELY FOLLOW INSTALLATION GUIDE TO PREVENT ANY
INSTALLATION MISTAKES.
2. DO NOT REMOVE POSITIONING STRIP PRIOR TO ASSEMBLY.
3. DO NOT REUSE FITTING.
4. DO NOT USE TUBE WITH DAMAGES 2 INCHES FROM THE
TUBE END.
5. DO NOT BEND TUBE AFTER CONNECTION IS MADE.
6. DO NOT USE OTHER THAN FOR INTENDED PURPOSE.
! CAUTION
Marking Gauge
Larger Nut
Smaller Positioning Strip
Smaller Tube
Larger Positioning Strip
Body
Smaller Nut
Larger Tube
1
