5
Hold the Body then hand tighten
the Larger Nut.
2
7
Ensure the marked line is visible on
the Smaller Tube.
8
Remove the Smaller Positioning Strip.
6
Insert the Smaller Tube into the
Smaller Nut until Tube stops.
10
With the 1st wrench hold the Body.
With the 2nd wrench tighten first the
Larger Nut then the Smaller Nut.
Torque values are available on the website if desired.
*Must wrench tighten the Larger Nut first.
Wrench tighten until there are no gaps
and the Larger Nut, Body, and
Smaller Nut are completely flush.
*If the marked lines are
visible, fitting and tube
are seated properly.
11
9
Hold the Body then hand tighten
the Smaller Nut.
2
