Change Setup code (Master)
• Press and hold 8 until double beep, enter Setup code and select function 0.
• Enter and confirm new Setup code.
Install Service
• Press and hold 8 until double beep, enter Setup code and select function 1.
• Press OK to confirm the operation.
• Enter and confirm new Service code.
Delete Service
• Press and hold 8 until double beep, enter Setup code and select function 3.
• Press OK to confirm the operation.
Reset lock
• Press and hold 8 until double beep, enter Setup code and select function 5.
• Display shows the message RESET.
• Press OK to confirm the operation.
• Enter a valid code.
• Lock is in pre-setup mode.
Pre-setup mode
• To open press 1.
• Setup code (Master) 5-5-5-5-5-5-5-5.
Lock setup
• Press and hold 8 until double beep. Enter the code 5-5-5-5-5-5-5-5.
• Display shows the following options (press P to scroll):
• CHANGE: change Setup code to exit pre-setup mode.
• DATE TIME: set time and date before lock setup.
• SETUP: check (OK) or change (P) lock configuration (
bold
= default settings)
•
DELAY DOWN
- DELAY UP: time delay counting up or down.
•
DUAL NO
- DUAL YES: dual mode active - dual mode not active.
•
LOCKOUT MANAGER
- LOCKOUT ALL: lockout set by Manager only or any valid code.
•
DATE DD/MM
- DATE MM/DD: date format European/American.
•
DIGITS 6
- DIGITS 7 - DIGITS 8: opening codes length.
Date and time
(check time at least once a year)
• Press and hold 8 until double beep, enter Setup code and select function 6 or press
and hold 6 until double beep and enter Service code.
• Display shows date and time menu: press OK.
• Display shows current time: enter hh:mm:ss and press OK.
• Display shows current date: enter dd/mm/yy and press OK.
Check time and date
• Press and hold OK until double beep: display shows the current language.
• Press P: display shows serial number and firmware version.
• Press P: display shows set time and date.
Set time lock
Make sure time and date have been properly set before setting time lock.
• Press and hold 8 until double beep, enter Setup code and select function 6 or press
and hold 6 until double beep and enter Service code: display shows date and time
menu.
• Press P: display shows time lock menu.
of
2
3
FUNCTION
0 1 3 5
6
7 9
DATE
TIME
11:40
11/12/18
TIME LOCK
FUNCTION
0
1 3 5 6 7 9
FUNCTION
0
1
3 5 6 7 9
FUNCTION
0 1 3
5
6 7 9
FUNCTION
0 1
3
5 6 7 9
FUNCTION
0 1 3 5
6
7 9
RESET
