Smartlink Medi-Link 100-824 страница 12 Скачать руководство пользователя

Страница: 12 / 17

Sidetone Gain (default = 3)

NB: Do not adjust, refer to SmartLink if required.

Network AMR (default = Disable)

NB: Do not adjust, refer to SmartLink if required.

Network Rate (default = 1)

NB: Do not adjust, refer to SmartLink if required.

“Signal Quality”

is displayed. Press the HELP Button.

The unit

displays the Cellular Signal Quality from 1 to 31 (10 to 31 good, 6
to 9 average, below 6 may need relocation or alternate Carrier).

Press the CANCEL Button to move to the next Program Option.

Default – Default all the PREFERENCES Programming Options

Press the CANCEL and HELP Buttons at the same time. The Medi-Link
GPRS/GSM unit will beep 3 times to acknowledge that ALL the Cellular
Programming Options has been Defaulted. Press the CANCEL Button to
move to the next Program Option.

9.7 Programming REPORTS

Option

Descriptions:

Warning! Do not adjust, refer to SmartLink.

“

13. REPORTS

” is displayed. Press the HELP Button.

NB: This Option is only available on the Medi-Link 3G+PSTN
unit V1.7 (100-827). Do not adjust, refer to SmartLink.

Press the CANCEL Button until “

Mode

” is displayed. Press the

HELP Button. “

8-PSTN,GSM,GPRS

” is displayed as the Default.

0-GSM ONLY

1-GPRS ONLY

2-GPRS,GSM

3-GPRS,PSTN

4-GPRS,GSM,PSTN

5-PSTN ONLY

6-PSTN,GPRS

7-PSTN,GPRS,GSM

8-PSTN,GSM,GPRS (as the Default)

Press the CANCEL Button to move to the next Program Option.

9.8 To EXIT PROGRAM Mode

Option

Descriptions:

10. CELLULAR
↑↓ Default

10. CELLULAR
↑↓ Sidetone Gain

10. CELLULAR
↑↓ Network AMR

10. CELLULAR
↑↓ Network Rate

10. CELLULAR
↑↓ Signal Quality

13. REPORTS
↑↓ Mode

ADEMCO

1.4

15. EXIT PROGRAM

ADEMCO

1.7

13. REPORTS

Содержание Medi-Link 100-824


















Результаты поиска

Содержание Medi-Link 100-824

Отзывы:

Похожие инструкции для Medi-Link 100-824

Бренды по названию

Популярные бренды

Smartlink Medi-Link 100-824, Руководство по установке

Результаты поиска

Содержание Medi-Link 100-824

Отзывы:

Похожие инструкции для Medi-Link 100-824

Бренды по названию

Популярные бренды