8
“Ph.2 Primary”
is displayed. Press the HELP Button.
1.
Pressing
the
HELP
Button
again
to
step
through
the
digits
1,2,3,4,5,6,7,8,9,0, * Star, # Hash,
and
– Pause
. To Store each digit, press
the CANCEL and HELP Buttons at the same time. The Medi-Link unit will
beep 3 times to acknowledge that the digit has been programmed. Repeat
this process until all digits are programmed.
NOTE: programmed a “ - ” as the first digit will delete the Phone
Numbers.
2.
Keep Pressing the CANCEL Button to move to the next Program Option.
9.4 Programming SERVER “GPRS” – “If Required”
Option
Descriptions: (IP Address & Port Programming)
“
2B. SERVER
” is displayed. Press the HELP Button.
“Svr.1 Primary”
is displayed. Press the HELP Button.
1.
Pressing the HELP Button again to step through the numbers from
0 up to
255
. To Store each numbers, press the CANCEL and HELP Buttons at the
same time. The Medi-Link unit will beep 3 times to acknowledge that the
numbers has been programmed. Repeat this process until all IP Address
numbers are programmed in.
2.
Press the CANCEL Button Twice to move to the next Program Option.
“Svr.1 Port”
is displayed. Press the HELP Button.
1.
Pressing
the
HELP
Button
again
to
step
through
the
digits
1,2,3,4,5,6,7,8,9,
and
0
. To Store each digit, press the CANCEL and HELP
Buttons at the same time. The Medi-Link unit will beep 3 times to
acknowledge that the digit has been programmed. Repeat this process
until all 4 digits are programmed in.
2.
Keep Pressing the CANCEL Button to move to the next Program Option.
9.5 Programming SYSTEMS
Option
Descriptions:
Warning! Do not adjust, refer to SmartLink.
“
9. SYSTEM
” is displayed. Press the HELP Button.
Report Pre Time (default = 10 x 10mS) V1.7 Onwards
NB: Do not adjust, refer to SmartLink if required.
Report Tone Time (default = 4 x 10mS) V1.7 Onwards
NB: Do not adjust, refer to SmartLink if required.
Report Pre Time (default = 4 x 10mS) V1.7 Onwards
NB: Do not adjust, refer to SmartLink if required.
Report Pre Time (default = 100 x 10mS) V1.7 Onwards
NB: Do not adjust, refer to SmartLink if required.
2A.PHONE NUMBERS
↑↓ Ph.2 Primary
Ph.2 Primary
↑↓ -
ADEMCO
1.4
2B. SERVER
Address
↑↓ 255.255.255.255
Svr.1 Primary
↑↓ Port
2B. SERVER
↑↓ Svr.1 Primary
Svr.1 Primary
↑↓ Address
Port
↑↓ -
9. SYSTEMS
↑↓ RptBetwnTime
ADEMCO
1.7
9. SYSTEMS
9. SYSTEMS
↑↓ Rpt Pre Time
9. SYSTEMS
↑↓ Rpt Tone Time
9. SYSTEMS
↑↓ Rpt QuietTime
