background image

 

 

 
 

– 3 –

 

  Adapter shall be installed near the equipment and shall be easily accessible. 

  The mains plug of adapter is used to disconnect device from power supply. The 

mains plug of adapter shall remain readily operable.  

  When using the STB with a plasma TV, do not put picture on pause for more 

than 5 minutes, due to plasma TV screen design it could lead to display damage. 
The STB manufacturer is not responsible for any damage caused in such 
manner. 

  The software on your STB is updated automatically. Do not unplug the power 

cord and do not disconnect the Ethernet cable while the software is updating. 
The STB manufacturer is not liable for any consequences of incorrect software 
update.  

  The manufacturer does not guarantee the absence of interference with other 

devices. To eliminate possible interference, increase the distance between the 
STB and other equipment, or connect equipment using a different setup.  

  In accordance with international safety requirements for radio equipment this 

device should be installed and operated with a minimum distance of 20 cm (7.8 
inches) between the device and the body. 

  The device is going to be operated in 5150 to 5250 MHz frequency range. It is 

restricted only to indoor use. This device may be operated in all member states 
of the EU. 

 

 

To prevent possible hearing damage, do not listen at high volume 
levels for long periods. 

Indicators and Slots 

Front Panel

 

 

 

 

Содержание SML-5051W

















Отзывы: