HEM8500 Engine CAN Monitoring Controller User Manual Page 34 of 45
No.
Type
Description
28.
N Position Input
Only when the neutral input is active, the unit is allowed to start; and
non-neutral gear is not allowed (input port configuration).
Otherwise, the panel button can start normally.
29.
Wake-up Input
When the engine speed is greater than the initial speed of the
throttle, the engine will run normally, and within the set wake-up
delay time, the wake-up input is detected within the set time, the
engine is in normal state.
30.
Regeneration
Inhibition
When engine type selects 13.VOLVO-EMS 2.4, the corresponding ID
is sent after processing to prohibit regenerative output.
31.
Manual Regeneration
When engine type selects 13.VOLVO-EMS 2.4, the corresponding ID
is sent after processing to manually regenerate the output.
32~50
Reserved
Reserved
Table 18 User-defined Functions of Programmable Input Ports
No.
Item
Content
Remark
1
Setting
(0~50)
See
Input Port Function List
2
Active Type
(0~1)
0: Close to activate
1: Open to activate
3
Active Speed
(0~2500) r/min
Alarm is active when speed
exceeded this threshold.
4
Active Action
(0~2)
0: Warning
1: Shutdown
2: No Action
5
Delay
(0~20.0) s
NOTE:
User-defined input ports character strings can be set only via PC software.
