Smartec STC-IPM3095A, Руководство пользователя

Страница: 28 / 45

Set Up
26
2.5 Camera/SD Recording
Images during "Alarm In", images during "Motion Detection", and images of
"Scheduled Recording" can be stored in an SD memory card inserted in the network
camera.
When recording alarm images, perform "Event Settings" first and set records in the
following sequence.
Record setting
1
Insert SD memory card to the camera.
･
Remove the SD card cover and insert an SD memory card. Then mount the SD
card cover.
･
Click "SD Recording" in the setting menu. Check "Insert SD Utility card" in the
displayed SD Utility Card In/Out portion. Then click the Execute button.
･
Click the Format button will format the SD memory card.
Important
● Be certain to check "Remove SD Utility card" in the SD Utility Card In/Out portion
when removing the SD card. Then click the Execute button.
● Removing SD Card without executing "Remove SD memory card" may destroy
data.
2 Configure each setting items.
■
Event Recording
● Alarm In
ON: Images are recorded when an external alarm occurs.
OFF: Images are not recorded when an external alarm occurs.
● Motion Detection
ON: Images are recorded when motion is detected.
OFF: Images are not recorded when motion is detected.
● Pre-Recording
Set the number of images to be recorded immediately before an alarm occurs.
Images of the moment when an alarm occurs are not included.
● Post-Recording
Set the number of images to be recorded immediately after an alarm occurs.
Images of the moment when an alarm occurs are not included.