Smartec STC-IPM3095A, Руководство пользователя

Страница: 22 / 45

Set Up
20
2.2 Camera/Basic Settings
Basic items such as size and quality of delivered images of the camera can be set.
1 Click "Image Settings" on the Setting Menu.
･
A sub menu for Camera Settings will appear.
2 Click "Basic" in the sub menu.
･
The screen of "Camera - Basic Settings" will appear.
3 Configure each setting items.
･
Click the Save button to save settings.
･
The settings will not be reflected unless the Save button is clicked.
NOTE
This setting item can be set by user log-in also if the item is set correctly in the
settings for "Admin. Functions"
● Brightness Adjustment
The camera automatically adjusts the level of brightness of images. Adjust so that
the image level becomes optimum in accordance with conditions of the object.
Images become brighter higher the level is. Images are dark lower the level is.
● Day/Night
This function enables the camera to capture pictures in diverse lighting conditions.
COLOR: always to capture color images, even under dark conditions.
BW
：
always to capture black and white images, even under bright conditions.
AUTO: automatically to enable it to capture pictures in diverse lighting conditions,
adapt automatically to low-light conditions, and operate even in very dark
environments.
NOTE
The brightness level of images is controlled automatically by adjustment of the lens,
AGC and slow shutter.
• D/N delay time
It is a span of time after which the camera switches into b/w mode from color
mode upon reaching a certain level of illumination (which is regulated by D/N
level).It has a following range of values (sec): 0/5/10/15/30. If it is set as zero,
then switching occurs immediately; if 30, then half a minute later.
•
D/N level
This feature regulates the level of illumination upon reaching which the camera
switches into b/w mode (and then back to color mode when it gets bright
enough). Totally, there’re three options: LOW, MID and HIGH.
● Auto Gain Control
Set a maximum value for operational gain of the auto gain control circuit. Set to
maximum if the object is too dark and camera sensitivity is low. The camera
sensitivity increases in the order of "LOW," "MID" and "HIGH” Noise also increases
when Auto Gain Control is near maximum. Lighting is recommended to obtain
good image quality.