Smartec STC-IPM3095A, Руководство пользователя

Страница: 16 / 45

Introduction
14
Connecting Camera and Personal Computer
1 Connect LAN cable and turn the power on.
Connect the LAN cable (straight cable) connected to the camera to the hub. Or,
connect the camera to a personal computer with the power turned on using the
LAN cable (cross cable).
･
Connect AC 24V/DC 12V to the power terminal.
2 Set the IP address of the personal computer.
･
Set the IP address which you are not using other than 192.168.0.30 (camera's
IP address).
･
Set the IP address to 192.168.0.50 (and subnet mask to 255.255.255.0) as an
example.
･
For details on the procedure, refer to the user's guide of the personal computer.
3 Test the camera connection using ping.
･
Start a command prompt. Type "ping 192.168.0.30" and press "Enter" key.
･
If the "Reply from..." message appears, the connection is correctly established.
4 Search the camera by "IPFinder" explained and view a camera image.
1. Start "IPFinder" and click the "Search" button.
･
Confirm that the camera name "IP CAMERA" is displayed in the camera list.
2. Click "IP CAMERA", to select.
･
Check that the camera name, IP address and HTTP port No. are displayed in
the "Network Camera Lists" field.
3. Double-click the camera you wish to log-in.
･
The screen for inputting the user name and password will appear. Input the
administrator log-in ID and password. (See "Log-in Screen")
4. A camera image screen of the network camera will appear.