If you need to view specific places routinely, you should program presets. A preset is a
programmed video scene with automatic pan, tilt, zoom, focus and iris settings. Once
programmed, entering the number and pressing a
Preset
button on your controller automatically
calls up the preset. In addition, presets may be assigned to alarm actions or as the “home”
position for the dome camera. As many as 240 presets, whose positions are saved in the
dome’s firmware, may be programmed.
There are three pages of preset menu, each page can hold 80 presets. Pages can be scrolled
by pushing the
Joystick
to the Left or Right on the first or last No. of Preset.
x : 16 digits of title for preset label
= : blank preset position
* : position has the preset
█ : Current cursor position
Follow steps below to store the Preset positions:
1. Press
MENU
to display the main menu. Select the Preset option by using the
Joystick
to the
right. (Press Prst to go directly to the Preset menu without going through the main menu.)
2. Select the blank preset position to be stored by pushing the
Joystick
up, down, right, or left.
3. The position, which is marked with
*
, already has the preset view assigned. To review the
stored preset, press Prst key on the
*
The camera will show the stored preset view.
4. After selecting a blank position, press and hold
CTRL/PGM
, Use the
Joystick
to control the
direction of the camera and lens.
5. After aiming the camera (view direction and lens control), release
CTRL/PGM
. Then twist the
Joystick
handle or Press
Tele
or
Wide
Key to store the selected view. The position number
will be displayed and the user will be prompted to enter a preset title.
PRESET SETUP
NO. 001: xxxxxxxxxxxxxxxx
FOCUS : AUTO (MANUAL)
IRIS : AUTO (MANUAL)
DWELL : 03 SEC(3~99)
1234567890 1234567890
00█***======01==========
02==========03==========
04==========05==========
06==========07==========
JOY-LEFT TO PREV. PAGE
SAVE AND EXIT(ESC TO CANCEL)
