MyOT interface/actuator for OpenTherm Boilers
User manual and data sheet
6
2 f pause
No communication on the OpenTherm bus.
5 f pause
No Wi-Fi connection and/or Internet communication.
The error report on Wi-Fi can concern both a lack of connection to the local network and a failure to connect to the
SmartDHOME server (lack of Internet, server temporarily unreachable, etc.).
Wi-Fi Configuration
ATTENTION!
Although the device has multiple communication modes, they cannot be configured at the same time. Before
configuring the device, it is advisable to carefully choose the type of communication desired.
ATTENTION!
To use the application, it is necessary to purchase a paid package of the IoB portal. Please contact the sales
representative or the company by sending an email to
WI-FI Configuration using application (recommended)
For correct device configuration, you need to download and install the IoB application on your smartphone. Then set the
MyOT in programming mode by turning on the device and pressing the
function
key for about 3 seconds. When the button
is released, the device will enter configuration, signaling the status with alternating
flashing of the LEDs (red and green). This will create the “IoB” Wi-Fi to which you
will need to connect to proceed with the configuration
At this point it is necessary to open the application installed at the beginning. Once
entered, press Set the
Remote Server/ Wi-FI
on the Home screen (see image on
the left) and click on continue in the pop-up that will appear.
