background image

 

 

airBridge TOTAL

 Wireless Ethernet Client         

User  Manual 

 Revision 1.42 

airPointPRO  TOTAL

  Wireless  Access Point 

airPoint  TOTAL  

Wireless  Access  Point 

 
For Windows 98 / ME / NT / 2000 / XP 

 
RF  Safety  Precaution 

 
   airBridge  TOTAL , airPoint  PRO  TOTAL  and  airPoint  TOTAL  gives  out  electromagnetic  
Radiation  through  the  antenna . . It  is  harmful  to  be  in  contact  with  the  antenna  or  to  be  in  
close  proximity  when  the  airBridge  TOTAL  or  airPointPRO  TOTAL  or  airPoint  TOTAL is  
powered  ON . The  safe  distance  is  23  centimetres   from  the  antenna . The  indication  for  RF  
radiation  is  the  lighting  up  of  Blue  LED  on  the  device . 

 

 

Introduction : airBridge TOTAL 

airBridge TOTAL is a wireless client  with  integrated  13  dBi  panel  antenna which can be used to 
connect any PC with Ethernet port to a network / PC / Internet wirelessly. It is a simple plug and play 
device needing no configuration. It  operates at 2.4 GHz ISM band.  
 It provides data rates upto 11Mbps and encryption capability of 64 bits or 128 bits. It can  interface 
with any wireless LAN device complying to 802.11b specifications. 
airBridge TOTAL can be used as a client device in a client to access point communication mode. 
Numerous applications like Broadband connectivity to farflung neighbourhood homes, wireless 
networking  of PC's in a campus with lot of foliage, wireless networking across waterways, Roads, 
Valleys and rough  terrain. The PC gets connected to the Internet through the airBridge TOTAL and 
Access point. 

 
airPointPRO  TOTAL : 

airPointPRO  TOTAL   is  wireless  Access  Point  . It  operates  at  2.4 GHz  ISM  band  and  conforms  to  IEEE  
802.11b  specs .Using  high  gain  external  Omni / Directional   antennas  it  can  provide  a  range  of 
upto  32  kilometers . It  can  provide  data  rates  upto  11 Mbps . Encryption  capability  of  64  bits  or  128 bits  
provides  network  security .  airPointPRO  TOTAL  can  provide  network  connection  to  any  Wi – Fi   
compliant  device . 
airPointPRO  TOTAL  can  be  used  as  Access  Point  or  as  Client  Bridge  or  as  Wireless Bridge .The  home  
PC  gets  connected  to  the  internet  through  the  airBridge  TOTAL  and  airPointPRO  TOTAL . The  airPoint  
PRO  TOTAL  is  identical  to  airBridge  TOTAL  .  
 
 

airPoint  TOTAL : 

airPoint  TOTAL  is  wireless  Access  Point . It  operates  at  2.4  GHz  ISM  band  and  conforms  to  IEEE   
802.11b  specs . Using  high  gain  external   Omni / Directional  antenna  it  can  provide  a  range  up  to  32   
Kilometers . It  can  provide  data  rates  upto  11 Mbps . Encryption  capability of  64  bits  or  128  bits  provides   
network  security . airPoint  TOTAL  can  provide  network  connection  to  any   Wi – Fi  compliant  device. 
 
airPoint  TOTAL  can  be  used  as  Client   Bridge  also . The  home  PC  gets  connected  to  the  internet  
through  the  airBridge  TOTAL  as  client  and  airPoint  PRO  TOTAL  or  airPoint  TOTAL  as  Access  
Point . .The  airPoint  TOTAL  is  identical  to  airBridge  TOTAL  .  
The  following  description  up  to   “  Configuration “  is  common  to  airBridge  TOTAL , airPoit  PRO  TOTAL  

Содержание airBridge TOTAL






















Отзывы: