●
Connect the airBridge to the Network Cards's
RJ45 connector using the given cable.
Make sure the power to the airBridge is
ON.
●
Start the simple Monitor by clicking on the
shortcut Start -> Programs -> smartBridges ->
simpleMonitor.
●
Click on Search button.
●
This will open up a Login Dialog box with default
parameters.
●
Click OK to Login to airBridge.
●
If the login parameters are correct, you will get
the message :
Successfully read the airBridge Configuration
.
Security
●
By default encryption is disabled which means the
communication is not secure. In case you want to
have a secure communication, ensure that the WEP
encryption setting for airBridge are the same as that
of Access Point.
●
To set the encryption keys click on security tab :
●
Select the Encryption Key(64Bit/128Bit).
●
Select HEX & enter hex data.