●
Login into airPoint-PRO TOTAL connected to LAN1. (Follow step 1 in configurating the
airPoint-PRO TOTAL) .
●
Select "Wireless Bridge" Tab.
●
Select Point to Point Mode
●
Key in the MAC Address of airPoint-PRO TOTAL connected to LAN2.
●
Click "Set Parameters".
●
Similarly Key in the MAC Address of airPoint-PRO TOTAL connected to LAN1 into airPoint-PRO
TOTAL connected to LAN2.
●
Make sure that Operating Channel, and WEP Encryption settings are same for all the
airPoint-PRO TOTALs.
2. Point to MultiPoint Mode.
This Mode is used to connect more than 2 LANS together.
●
In this Mode every LAN is represented by the MAC Address of the airPoint-PRO TOTAL
connected to it.
●
Login into airPoint-PRO connected to LAN1. (Follow step 1 in configurating the airPoint-PRO
TOTAL) .
●
Select Wireless Bridge Tab, Select Point to MultiPoint Option.
●
Key in the MAC Addresses of all the airPoint-PRO TOTALs connected to LAN2 and LAN3.
●
Click on 'Set Parameters'.
●
Similarly Login into airPoint-PRO TOTALs connected on the LAN2, and LAN3 and Key in the
MAC Addresses of other LANs in the Point to MultiPoint Mode.
●
Please make sure that Operating Channel, and WEP Encryption settings are same for all the
airPoint-PRO TOTALs.
Dial a Power
This feature of airPoint-PRO TOTAL will allow you
to control the radio transmit power of the airPoint-
PRO TOTAL from the SimpleMonitor.
●
Select appropriate antenna type from drop down
lists.
●
Specify Cable Loss value in the Edit box. The
limits for this value are min 0.5 dB, max 10.0 dB.
●
Use slider control to adjust EIRP Output power
from the airPoint-PRO TOTAL. EIRP Output
power is displayed in the Display Box.
