SMART Podium 624, Руководство пользователя

Страница: 5 / 66

IMPORTANT INFORMATION
iii smarttech.com/kb/171254
Cordless pen
l
The cordless pen is a sealed unit that contains electronics but no batteries. Opening the
cordless pen will damage these electronics, making the cordless pen unusable and voiding
the warranty.
l
Do not touch the screen with any instrument other than a compatible projected capacitive
(PCAP) stylus pen, or the supplied cordless pen. The use of other instruments may damage
the screen.
l
Do not apply excessive pressure with the pen. This can shorten the pen's life.
l
Replace a cordless pen nib when the nib wears down. If a pen nib wears down too far, you
might scratch or damage the interactive pen display's surface. Extra nibs are supplied with
each interactive pen display.
l
Avoid excessive vibration of the cordless pen. Hitting or dropping the cordless pen can
damage the pen's components.
l
Do not immerse the cordless pen in water.
Environment
l
Avoid setting up and using the interactive pen display in an area with excessive levels of
dust, humidity and smoke or where it is exposed to direct sunlight, severe temperature
changes, heat from other appliances, water or any other liquid. Operate the interactive pen
display within a temperature range of 41°F and 95°F (5°C to 35°C) and a humidity range of
20% to 80% (non-condensing). However, you can store the interactive pen display within a
temperature range of -4°F to 140°F (-20°C to 60°C) and a humidity range of 20% to 90%
(non-condensing).
l
Do not modify the power cable. Handle it carefully and avoid bending it excessively. Do not
place the power cable where it is likely to be stepped on or pinched by items placed on or
against it. If you must run a cable over the floor, lay it in a flat, straight line, and secure it to
the floor with tape or a cable management strip of contrasting color.
l
The interactive pen display comes with a three-prong, grounding-type power plug
designed to fit into a grounding-type power outlet. If you cannot insert the plug into a power
outlet, contact an electrician to replace the power outlet. Do not modify the power plug.
l
Place the interactive pen display in a location where users will have clear and direct access
to the main power plug, because they must be able to disconnect the unit at all times.
Always disconnect the interactive pen display before you install any devices or perform any
maintenance.