SMART PCIE-6001, Инструкция по установке и эксплуатации

Страница: 28 / 48

28 PCIE-6001 Installation and Use (6806800U73B)
Hardware Preparation and Installation
Hardware Preparation and Installation
 Install the device at once after you take it out of the anti-static package. If you need
to lay down the device, place it back in the anti-static package. Do not lay the
device on the shelf or cabinet.
 Monitor the temperature and humidity of the equipment room. Warm air decreases
the humidity but increases the static electricity in the room.
2.6 M.2 AHCI or NVMe SSD Installation and
Removal
This section provides procedures on how to install or remove M.2 AHCI or NVMe SSD
modules from a PCIE-6001 card.
2.6.1 M.2 AHCI or NVMe SSD Installation on the PCIE-6001 Card
PCIE-6001 provides four (4) sets of the hardware as shown in Figure 1-1 .
To install M.2 AHCI or NVMe SSD modules on a PCIE-6001 card:
NOTICE
Damage of Circuits
Electrostatic discharge and incorrect module installation and removal can damage
circuits or shorten their life. Before touching the module or electronic components,
make sure that you are working in an ESD safe environment.