SMART PCIE-6001, Инструкция по установке и эксплуатации

Страница: 23 / 48

PCIE-6001 Installation and Use (6806800U73B) 23
Chapter 2
Hardware Preparation and Installation
2.1 Overview
This chapter provides information on unpacking and inspecting the card procedures and
safety precautions to be followed while handling the card. The environmental, thermal, and
power requirements, and the installation and removal procedures of the card are also
explained in this chapter.
2.2 Unpacking and Inspecting PCIE-6001 Card
Shipment Inspection
To inspect the shipment, perform the following steps:
1. Verify that you have received all items of your shipment:
 One PCIE-6001 card

Four (4) M2.5 x 4 mm screws
 Four (4) M2.5 x 4 mm shoulder screws (these screws are used to attach the SSD
module to the PCIE card)

Four (4) 6 mm long (diameter 3 mm) M2.5 hex standoffs
 One printed copy of Quick Start Guide

One printed copy of Safety Notes Summary
NOTICE
Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the card can
damage circuits or shorten their life.
Make sure that you are working in an ESD-safe environment, before touching the
card or electronic components.