SMART PCIE-6001, Инструкция по установке и эксплуатации

Страница: 26 / 48

26 PCIE-6001 Installation and Use (6806800U73B)
Hardware Preparation and Installation
Hardware Preparation and Installation
2.3.2 Power Requirements
The PCIE-6001 payload card accepts single and double-sided modules up to a power
consumption of 10W per module. The module interface must comply with the NVMe (NVM
Express) standard. In case of MaxCore platforms, the MaxCore system reads the thermal
sensors and provides sufficient cooling.
The following table provides the typical power consumed by the PCIE-6001 card.
2.4 Weight and Dimensions
The following table provides weight and dimensions of PCIE-6001 card.
Table 2-2 Power Requirements
Mode PCIe slot power
Idle 15 Watts
Active 52 Watts
Peak 75 Watts
Idle
: Drives are powered, but not being actively utilized.
Active
: When the drives are being utilized at room temperature.
Peak
: When the drives are being utilized at 40°C ambient temperature.
Table 2-3 Weight and Dimensions
Feature Value
Height 111.15mm (4.37 inches)
Length 312.00mm (12.28 inches)
Width 14.47mm (0.57 inches)
Weight 0.14kg (0.30 lb)
Front Panel Width 14.47mm (0.57 inches)