SMART FSSBID 100, Инструкция по установке и руководство интегратора, Страница: 54 / 104

4 4 | M O D E L F S S B I D 1 0 0 H : C O N N E C T I N G D E V I C E S I N S I D E Y O U R S M A R T M O B I L E
S T A N D ’ S C A B I N E T
1010651 Rev C1
Perform the following procedure to connect a SMART Hub SE240
to your SMART Mobile Stand.
NOTE
You require a USB A to USB B cable (not included) if you’re installing a computer
with your SMART Hub SE240.
To connect your
SMART Hub SE240
1. Connect the 3.5 stereo audio plug from cable A01 to your SMART Hub’s
Computer Audio receptacle, marked 1 .
2. Connect the three-plug RCA cable AV02 included in your SMART Mobile Stand’s
accessory kit as follows:
– Connect the yellow plug to your SMART Hub’s Composite Video
RCA receptacle.
– Connect the red plug to the adjacent Audio In RCA receptacle, marked R .
– Connect the white plug to the adjacent Audio In RCA receptacle, marked L .
3. Connect the two-plug RCA cable A04 as follows:
– Connect the red plug to your SMART Hub’s Audio Out RCA receptacle,
marked R .
– Connect the white plug to your SMART Hub’s Audio Out RCA receptacle,
marked L .
NOTE
You previously connected the other end of this cable to your
flat-panel display (see page 42).
4. Connect the two-plug RCA cable A05 included in your SMART Mobile Stand’s
accessory kit as follows:
– Connect the red audio plug to your SMART Hub’s remaining Audio In
RCA receptacle, marked R .
– Connect the white audio plug to your SMART Hub’s remaining Audio In
RCA receptacle, marked L .
5. Connect S-Video cable V02 included in your SMART Mobile Stand’s accessory kit
to your hub’s S-Video receptacle.
6. Connect DVI cable V03 in the prewired cable harness inside the cabinet of your
SMART Mobile Stand to your hub’s Video In receptacle (marked Computer 1 ).
7. Connect DVI cable V04 to your SMART Hub’s DVI receptacle, marked Video Out .
NOTE
You previously connected the other end of this cable to your
flat-panel display (see page 42).