SMART FSSBID 100, Инструкция по установке и руководство интегратора, Страница: 52 / 104

4 2 | M O D E L F S S B I D 1 0 0 H : C O N N E C T I N G D E V I C E S I N S I D E Y O U R S M A R T M O B I L E
S T A N D ’ S C A B I N E T
1010651 Rev C1
To connect your
flat-panel display
1. Connect speaker cables A02 and A03 to your flat-panel display’s
speaker receptacles.
2. Connect the VGA video plug from cable V04 to your flat-panel display’s
VGA video receptacle.
3. Connect the 3.5 mm stereo audio plug from cable A04 to an audio receptacle
on your flat-panel display’s connection panel.
4. Connect the SMART Mobile Stand’s prewired power cable to your flat-panel
display’s power receptacle.
5. Connect the other end of this cable to an available receptacle on your
SMART Mobile Stand’s power bar.
IMPORTANT
• Your flat-panel display won’t look exactly like the one shown on page 41.
• Some flat-panel displays require audio/video adapters, which you can
purchase from your authorized SMART reseller .
• Don’t connect your SMART Mobile Stand to a power outlet before you install
the rear access panels (page 58).