Online access to the vehicle
G
WARNING
If you operate information and communi-
cation equipment integrated in the vehicle
when driving, you could be distracted from
the traffic situation. This could also cause
you to lose control of the vehicle. There is a
risk of an accident.
Only operate this equipment when the
traffic situation permits. If you cannot be
sure of this, stop the vehicle paying atten-
tion to road and traffic conditions and
operate the equipment with the vehicle
stationary.
G
WARNING
If you use mobile information systems and
communications devices while driving,
you will be distracted from traffic condi-
tions. You could then lose control of the
vehicle. There is a risk of an accident.
Only operate these devices when the vehi-
cle is stationary.
Observe the legal requirements for the coun-
try in which you are currently driving.
You can use "smart control" to access remote
query and to configure your vehicle
remotely. It can be accessed from computers
and smartphones. The Internet address is
available from any smart centre. It is also
possible to call up "smart control" via the
smart website.
Access to "smart control" is free of charge for
the first three years commencing from hand-
over of the new vehicle, subject to the avail-
ability of the service. Thereafter you can
continue to subscribe to use the "smart con-
trol" service.
The availability and features of "smart con-
trol" may vary from country to country.
Requirements for the use of "smart control":
R
Registration on the "smart portal" Internet
page via smart.com/portal.
A valid e-mail address or mobile phone
number is necessary for registration and
the terms of use must be accepted.
R
The vehicle must be linked with a personal
"smart portal" account at a smart centre.
Verification and presentation of the vehi-
cle registration document are required to
link the vehicle. The vehicle identification
number (VIN) is also required.
R
The desired functions must be activated
after linking the vehicle.
For activation, the "smart control" terms of
use for both the remote query and remote
configuration must be accepted via the
"smart portal". The portal address is sup-
plied by the smart centre.
R
The vehicle must be connected to the
Internet.
Connection is made possible via the mobile
communications module integrated in the
vehicle.
Once these requirements are fulfilled, the
following functions, for example, may be
used:
R
Calling up the current locking status of the
vehicle.
R
Calling up information on the distance
before the next recommended service or if
a service is already due.
R
Calling up the current vehicle position in
the range of approx. 1.5 km around the
vehicle.
During the charging process, additional dis-
plays can be called up such as the predicted
time until charging is completed or the
charging capacity.
If there is a delay in the synchronisation of
data via the mobile phone network, the dis-
plays in the vehicle and at "smart control"
may temporarily differ from each other.
Further information on "smart control" is
available at any smart centre and via
www.smart.com/smartcontrol.
Using smart "ready to" services
Useful information
smart "ready to" services are only available
in certain countries.
146
Using smart "ready to" services
>> Using online offerings
.
