SMART 433-CMU, Инструкция по установке и эксплуатации, Страница: 10 / 12

• Call
: When switched
to this setting, the
Central Monitor will
alert the caregiver
by voicing the
programmed number
of the activated
device.
• Alarm: Call (above)
is preceded by a siren
sound.
• Unlock
when
programming
• Lock to prevent
tampering or loss
of programming.
To plug the Central
Monitor into a wall outlet,
use a Smart AC-04 9-Volt
AC adaptor.
An external speaker can
be plugged into this
outlet if you wish for
louder volume.
Call/Alarm
Unlock/Lock
DC Input
Speaker
Call/Alarm Switch
Unlock/Lock Switch DC Input
External Speaker Outlet
Call
Alarm
Unlock
Lock
Call
Alarm
Unlock
Lock
Call
Alarm
Unlock
Lock
Call
Alarm
Unlock
Lock
•
Notes
• Low power affects performance. Symbol indicates that battery is low. Replace batteries
when this symbol appears on the Central Monitor.
• There is no ON/OFF switch for the Central Monitor. If you choose not to use the AC-04 AC adaptor
to power the Central Monitor and depend on batteries, it is recommended that you remove
batteries when the Central Monitor is not in use. When batteries are replaced, all Nurse Call
Buttons and other components that were programmed to work with the Central Monitor prior
to removing the batteries will still be programmed to work when the batteries are replaced. They
will not have to be re-programmed.
• Avoid outside interference. When in programming mode, be sure that no Nurse Call Button or
other component that you are not currently programming is active within range of the Central
Monitor (for example: do not press the Nurse Call Button, do not separate Exit Alarm). The
symbol indicates that a component is active within range of the Central Monitor.
• To ensure optimal wireless performance and reduce electrical interference, do not place the
Central Monitor close to metal objects or other electronic devices.
• Do not expose the Central Monitor to heat or direct sunlight.
• Avoid dampness and water.
• Numbers flashing across the screen of the Central Monitor indicates that there are no Nurse Call
Buttons or other components currently programmed to work with the Central Monitor.
433-CMU
433-CMU
433-CMU
433-CMU
10