SMART Embedded Computing PCIE-7217, Инструкция по установке и эксплуатации

Страница: 22 / 108

22 PCIE-7217 Installation and Use (6806873A01B)
Safety Notes
Safety Notes
RJ-45 Connector
System Damage
RJ-45 connectors on the I/O module of the system or on PCIe cards are either twisted-pair
Ethernet (TPE) or E1/T1/J1 network interfaces. Connecting an E1/T1/J1 line to an Ethernet
connector may damage your system.
 Make sure that TPE connectors near your working area are clearly marked as
network connectors.
 Verify that the length of an Ethernet cable connected to a RJ-45 TPE connector
does not exceed 100 meters or approximately 328 feet.
 Make sure the TPE connector of the system is connected only to Safety Extra Low
Voltage (SELV) circuits.
 If in doubt, ask your system administrator.
For more information, see the documentation of the respective product.
Laser
Personal Injury
If a label with the words CLASS 1 LASER PRODUCT is affixed to your system, the unit is
equipped with a laser device. These devices contain a laser system that produces visible
or invisible laser radiation (or both) and can be harmful to the eyes.
Seek supplemental information (power, wavelength, visibility, pulse duration, applicable
standards) prior to servicing equipment. Do not look at laser device with an optical
instrument at any time.
Battery
Blade Damage
Incorrect battery installation may result in a hazardous explosion and blade damage.
Always use the same type of lithium battery as is installed and make sure the battery is
installed as described in the manual.
Data Loss
Installing another battery type than the one mounted at product delivery may cause data
loss.