SMART Embedded Computing PCIE-7217, Инструкция по установке и эксплуатации

Страница: 20 / 108

20 PCIE-7217 Installation and Use (6806873A01B)
Safety Notes
Safety Notes
System Installation
System Damage
To avoid system damage, verify that the system environment meets the environmental and
power requirements given in this manual before installing the system. Before you begin to
set up and cable your new system, consider these guidelines:
 Install the system safely. Make sure that cables and cords are out of the way.
 Make sure that the set-up is comfortable for users.
Environmental contamination can impair system operation.
Locate the system in a stable area free of excess movement and jarring, and free of dust,
smoke, and electrostatic discharge (ESD).
Make sure that the temperature does not exceed the operating temperature given in the
environmental requirements in this manual and allow room for proper air flow for cooling.
Personal Injury or System Damage
A top-heavy rack can tip, causing damage to equipment and injury to personnel.
Use caution when pulling the system out of the rack, as it could fall and cause personal
injury.
If your system is the only one in the rack, make sure to mount the system in the lowest part
of the rack. If several systems are installed in one rack, start with the heaviest component
at the bottom. If the rack is equipped with stabilizing devices, make sure that they are
installed and extended so that the rack is secure. Then proceed to mount or service the
system.
Personal Injury
The system is heavy and improper handling may lead to muscle strain or back injury. Use
two people to lift the system, or use lifting aids and proper lifting techniques when handling
the system. Do not use the handles on the fans or PSUs to lift the system.
System Damage
During handling, shipping, and assembly, it is possible that pins, mounting screws, fans,
and other items became loose or damaged.
Do not operate a damaged system, as it may damage the devices that interface with the
system.