© 2016 CBT Supply, Inc. US
Patent No. 7,509,912
Technical Support: 800-770-7042
2
Getting Started
These installation instructions guide you through the proper way of
completing the assembly of the flipIT Laptop Safe® Kit FIL-18 and FIL-23
with positive latch release and independent plunge lock.
It is especially important that the installer observe proper care in pro-
tecting surfaces from abrasion.
For any questions or assistance, please contact Technical Services at
800-770-7042.
POWER TOOLS ARE DANGEROUS
Review the safety procedures supplied by your power tools’ manufac-
turers. Heed all warnings for your safety’s sake. Always use safety
glasses and wear proper apparel that won’t get caught in moving
parts. CBT Supply, Inc. will not be held liable for misuse of tools and
disregard for power tool manufacturer’s safety precautions.
Tools needed for
full installation
Tools needed for pre-assembly:
• Power Drill
• Tape Measure
• Commercial Grade Jigsaw
• Phillips#2 Bit Screwdriver
• 3/8” Drill Bit
. 1/8” Drill Bit
• 3/8” Open-end Wrench
• Slot Screwdriver
• Pencil
• Square and straight edge
• Masking Tape
Tools needed for installation into
a factory-cut desktop only:
• Power Drill/Screw Gun
• Phillips#2 Bit Screwdriver
• 1/8” Drill Bit
• 3/8” Open-end Wrench
• Slot Screwdriver
STOP!
The installer must possess the skill to cut within the tolerance of
the template layout line if no factory-made cutout is made in the
table top. Do not attempt this installation without this level of
craftsmanship skill.
If a factory made cut is provided, only skills of using a screwdriver
and drill are required.
