© 2016 CBT Supply, Inc. US
Patent No. 7,509,912
Technical Support: 800-770-7042
11
Plunge Lock Keeper Plate
• The plunge lock works like a deadbolt lock
and locking plate
• Install the lock plate with two Euro screws
• The holes of this part are elongated to
allow fine adjustment and adaptation to
desktop thicknesses
• Test the operation that it clears the dead-
bolt when retracted and locks effectively
when extended.
• Option: One-way screws are provided for
the lock assembly. Use a 3/8” open end
wrench and appropriate screw drivers and
replace these one at a time, if extra mea-
sure of security is desired.
The deadbolt is shown extended.
Step 9:
Install laptop pads
• flipIT Laptop Safe® is dimensioned to
support a variety of laptop designs. Neo-
prene pads have been supplied to provide
padded protection and ventilation, but
they need to be installed to the needs of
the laptops to be used.
• First, place the laptop where it will be most
often used, which is right next to the front
lip. Place the pads on top of the laptop to
visualize where they will need to go. Keep
in mind if it might be likely to also use
laptops of larger or smaller sizes. If this
will be the case, choose a position that will
provide this range of support.
• Remove the laptop and the backing paper
from the pads and rest them in place.
• Test fit the laptop, and move the pads as
needed, then press them in place.
Keep in mind how the laptop will be connected
to power and data, even when stored. Wires
pass through the “mushroom tops” that also
provide the back wall of the chamber.
A telecom plate with customized connectors
may be custom ordered.
Optional one-way screws
supplied
