SMART Board M685ix2, Конфигурация и руководство пользователя

Страница: 76 / 98

A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
68
Setting Use Notes
Frequency Adjusts the display data
frequency of the projected
image from -5 to 5 to match
the frequency of your
computer’s graphics card. The default is 0.
This setting applies to VGA inputs only.
Tracking Synchronises your
projector’s display timing
with your computer’s
graphics card from 0 to 63. This setting applies to VGA inputs only.
H-Position Moves the horizontal
position of the source video
left or right from 0 to 100
(relative to the projected
image). Don’t adjust this setting unless you’re advised
to by SMART Support.
Apply this setting only after you make all
physical adjustments.
This setting applies to VGA inputs only and is
useful in situations where the source video is
cut off.
V-Position Moves the vertical position
of the source video up or
down from -5 to 5 (relative to
the projected image). Don’t adjust this setting unless you’re advised
to by SMART Support.
Apply this setting only after you make all
physical adjustments.
This setting applies to VGA inputs only and is
useful in situations where the source video is
cut off.
White Peaking Adjusts the image colour
brightness from 0 to 10
whilst providing more vibrant
white shades. A value closer to 0 creates a natural image and
a value closer to 10 enhances brightness. The
default is 10.
Degamma Adjusts the colour
performance of the display
from 1 to 3. The default is 2.
Colour Adjusts the Red, Green,
Blue, Cyan, Magenta and
Yellow colours on the
projector from 0 to 100 to
provide custom colour and
luminance output. Each colour has a default value of 100.
Adjustments to the colour settings register
under the User mode.