SMART Board M685ix2, Конфигурация и руководство пользователя

Страница: 27 / 98

C H A P T E R 3
Using your interactive whiteboard system
19
Setting Use Notes
USB Source
Select
Opens a sub-menu that
enables you to select the
video input on your projector
and the USB port on the
ECP (if present). The defaults are as follows:
l
HDMI 1, USB 1
l
HDMI 2, Disabled (no associated USB
input)
l
VGA 1, USB 2
Network menu
Network Activates the projector’s
RJ45 connector and network
features.
Status Displays the current network
status (
Connected ,
Disconnected or Off ).
The default is off.
DHCP Displays the status of the
network’s Dynamic Host
Configuration Protocol
(DHCP) as
On or Off .
The default is on.
On enables a DHCP server on the network to
automatically assign an IP address to the
projector.
Off enables an administrator to assign an IP
address manually.
Password
Reminder Emails the network
password to the previously
defined email recipient. See Webpage management on page 43 to set
up a destination email address.
IP Address Displays the projector’s
current IP address in values
between 0.0.0.0 and
255.255.255.255. To change the projector’s IP address, use the
RS-232 connector (see
Network controls on
page 63) or use a DHCP server to assign a
dynamic IP address and then set a static IP
address using the network remote
management feature (see
Remotely managing
your system through a network interface on
page 43).
Subnet Mask Displays the projector’s
subnet mask number in
values between 0.0.0.0 and
255.255.255.255.
Gateway Displays the projector’s
default network gateway in
values between 0.0.0.0 and
255.255.255.255.
DNS Displays the projector’s
primary domain name server
(DNS) IP address in values
between 0.0.0.0 and
255.255.255.255.