SMART Board M685ix2, Конфигурация и руководство пользователя

Страница: 24 / 98

C H A P T E R 3
Using your interactive whiteboard system
16
Setting Use Notes
V-Position Moves the vertical position
of the source video up or
down from -5 to 5 (relative to
the projected image). Don’t adjust this setting unless you’re advised
to by SMART Support.
Apply this setting only after you make all
physical adjustments.
This setting applies to VGA inputs only and is
useful in situations where the source video is
cut off.
White Peaking Adjusts the image colour
brightness from 0 to 10
whilst providing more vibrant
white shades. A value closer to 0 creates a natural image and
a value closer to 10 enhances brightness. The
default is 10.
Degamma Adjusts the colour
performance of the display
from 1 to 3. The default is 2.
Colour Adjusts the Red, Green,
Blue, Cyan, Magenta and
Yellow colours on the
projector from 0 to 100 to
provide custom colour and
luminance output. Each colour has a default value of 100.
Adjustments to the colour settings register
under the User mode.
Audio menu
Volume Adjusts the projector’s
volume amplification from -
20 to 20. The default is 0.
Mute Mutes the projector’s audio
output. The default is off.
If you mute the projector’s audio output and
then increase or decrease the volume, the
volume is restored automatically. You can
prevent this from happening by disabling the
volume control.
Disable Volume
Control Disables the projector’s
volume control.
System Output
Selects one or more
speakers or other audio
device. Select Line Out+Speaker , Line Out Only or
Speaker Only .
Projector Functions menu
3D On/Off Turns the DLP Link™
technology 3D feature on or
off. The default is off.