SMART Board M600ix3, Конфигурация и руководство пользователя

Страница: 29 / 114

CHAPTER 3
USING THE INTERACTIVE WHITEBOARD SYSTEM
21 smarttech.com/kb/170910
Setting Use Notes
Language menu
Language Selects the language used in
the projector menus. Projector menu support is available in English
(U.S.), English (UK) French, German, Dutch,
Danish, Finnish, Italian, Norwegian, Russian,
Spanish, Swedish, Portugese, Chinese
(Simplified), Chinese (Traditional), Czech,
Hungarian, Japanese, Malayasian, Polish,
Romanian, Arabic, Turkish, Greek, Slovak,
Korean and Hebrew. (U.S. English is the
default.)
Information menu
Lamp Hours Displays the current number of
lamp usage hours from 0 to
9999 hours from when it was
last reset. Always reset the lamp hours after you
replace a lamp, because lamp service
reminders are based on the current hours of
use. See
Resetting the lamp hours
on
page 36 for details on the lamp hours reset
procedure.
Input Displays the currently active
video input source (VGA1,
Composite, HDMI1, or HDMI2). Default is VGA1.
Resolution Displays the projector’s most
recently detected video
source signal resolution and
refresh rate. If no video source is currently active, this
setting displays the last known source signal
image resolution and refresh rate.
DDP Displays the projector’s digital
display processor (DDP)
firmware version in x.x.x.x
format.
MPU Displays the projector
microprocessor unit (MPU)
firmware version in x.x.x.x
format.
Network Version When the Network and VGA
Out setting is enabled,
displays the projector’s
network communications
processor firmware version in
x.x.x.x format.
If the Network and VGA Out setting is not
enabled, 0.0.0.0 appears.