A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
58
Field
Possible values
Description
target magenta
l
+ val
l
– val
l
= 0 to 100
The ranges must match the OSD ranges.
current magenta
Range: 0 to 100
The ranges must match the OSD ranges.
target yellow
l
+ val
l
– val
l
= 0 to 100
The ranges must match the OSD ranges.
current yellow
Range: 0 to100
The ranges must match the OSD ranges.
target videofreeze
l
= on
l
= off
Video freeze on/off
current videofreeze
l
= on
l
= off
Video freeze on/off
current displayhide
l
normal
l
frozen
l
muted
Matches the three states of the Hide button on
the remote control.
target displayhide
l
normal
l
frozen
l
muted
l
next
Set the mode directly or move from one state
to the next sequentially.
Use the above commands to set the property to an absolute value or to adjust the current value.
E X A M P L E
>get brightness
brightness=55
>set brightness = 65
brightness=65
>set brig5
brightness=70
>set brightness -15
brightness=55
>
All video commands also have an optional source specification. For example, to set the
brightness of a specific source, use the following command.