A P P E N D I X A
Remotely managing your system through a network interface
45
Submenu setting
Description
High Speed Fan
Adjusts the speed of the projector’s fan. Select
High
or
Normal
.
N O T E
Use the High setting when the projector’s temperature is high or
the altitude is above 1800m (6000').
Projector Mode
Adjusts the projection mode to
Front
,
Ceiling
,
Rear
or
Rear
Ceiling
.
I M P O R T A N T
SMART recommends that you never change this setting from
the
Ceiling
projection mode.
Source
Adjusts the input source to
VGA-1
,
VGA-2
,
Composite
,
S-Video
or
HDMI
.
VGA1
Assigns an alternative name to your VGA 1 input, which appears
when you select the VGA 1 input.
VGA2
Assigns an alternative name to your VGA 2 input, which appears
when you select the VGA 2 input.
Composite
Assigns an alternative name to your Composite video input, which
appears when you select the Composite video input.
HDMI
Assigns an alternative name to your HDMI input, which appears
when you select the HDMI input.
Emergency Alert
Turns the on-screen alert broadcast message on or off. When
enabled, this message displays over the current projected image.
Alarm Message / Alert
Message
Displays an on-screen emergency notification message
(maximum 60 characters).
Network settings
This menu allows you to use or not use Dynamic Host Control Protocol (DHCP) and to set the
network-related addresses and names when DHCP isn’t used.
Submenu setting
Description
DHCP
Determines whether the projector’s IP address and other network
settings are dynamically assigned by a DHCP server or are
manually set.
l
On
allows the network’s DHCP server to assign a dynamic
IP address to the projector.
l
Off
allows you to manually set the projector’s IP address and
other network settings.
IP Address
Displays or allows you to set the projector’s IP address in values
between 0.0.0.0 and 255.255.255.255.
Subnet Mask
Displays or allows you to set the projector’s subnet mask number
in values between 0.0.0.0 and 255.255.255.255.
