SMART Board Board 600i5, Конфигурация и руководство пользователя

Страница: 53 / 100

Projector lights and status
Two indicator lights (Power and Service) are located on the bottom of the SMART UF75 or UF75w
projector. Specific light sequences convey information about the state of the projector, including
errors.
I
I M P O R T A N T
After you resolve the projector’s issue, disconnect and then connect the projector power cable to
clear the indicator light sequence, and then reset the projector’s status (see Resetting the projector
on page 53).
Power light Service light Message
Solid amber Off The projector is off but still receiving power (Standby
mode). Press the
Power button on the ECP to turn it on.
Flashing green Off The projector is in the powering (startup) power state. Wait
for the projector to finish turning on.
Solid green Off The projector is in the operating (on) power state. Press the
Power button on the ECP twice to turn it off.
Flashing amber Off The projector is in the cooling power state. Wait for it to
finish cooling.
Off Flashing red The projector is overheating. It could shut down
automatically.
See The “Projector Overheated” message appears on page
45 to troubleshoot the projector.
Off Solid red The projector has a fan issue. It could shut down
automatically.
See The “Fan Failure” message appears on page 45 to
troubleshoot the projector.
Off Solid red The projector has a color wheel issue.
See The “Color Wheel Failure” message appears on page
45 to troubleshoot the projector.
C H A P T E R 6
Troubleshooting your interactive whiteboard system
43