SMART Board 480i6, Конфигурация и руководство пользователя

Страница: 77 / 106

A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
69 smarttech.com/kb/170584
current displayhide
l
normal
l
frozen
l
muted
Matches the 3 states of the hide button on the IR
remote controller
target displayhide
l
normal
l
frozen
l
muted
l
next
Allows for setting of the mode directly or to move
from one state to the next sequentially.
The above commands can be used to set the property to an absolute value or cause a relative
adjustment to be made to the current value. Examples of using this are below:
>get brightness
brightness=55
>set brightness = 65
brightness=65
>set brig5
brightness=70
>set brightness-15
brightness=55
>
All video commands should also have an optional source specification.
>set brightness = 65
brightness=65
This sets the brightness of the specified source.
>set brightness vga1 = 65
brightness vga1 = 65
This sets the brightness of the vga1 regardless of if the projector is on this source or not. The
operational parameters are ‘vga1’, ‘composite’, ‘hdmi1’.