SMART Board 480i6, Конфигурация и руководство пользователя

Страница: 41 / 106

C H A P T E R 5
Maintaining your interactive whiteboard system
33 smarttech.com/kb/170584
5. Use a Phillips screwdriver to loosen the two captive screws from the bottom of the lamp module
and gently remove lamp module.
A
B
N O T E
Don’t try to remove these screws. Captive screws can’t be removed, only loosened.
To put the new lamp module into the projector
1. Remove the new lamp module from its packaging.
2. Carefully place the lamp module into the projector and gently press the power end of the lamp
module against the projector to ensure the power plug makes contact with the projector’s power
receptacle.
A
B
N O T E
You should be able to place the lamp module into the projector easily without applying much
force.
3. Use the Phillips screwdriver to secure the captive screws.
I M P O R T A N T
Do not over-tighten the screws.