background image

THE RGB TO DVI(/VGA) CONVERTER 

 2 

 

Copyrights and Trademarks 

©2005. All rights reserved.  This information may not be reproduced in any manner without 
the prior written consent of the manufacturer. 

Information in this document is subject to change without notice and the manufacturer shall 
not be liable for any direct, indirect, special, incidental or consequential damages in 
connection with the use of this material. 

All trademark and trade names mentioned in this document are acknowledged to be the 
property of their respective owners. 

 

Disclaimer 

While every precaution has been taken in the preparation of this manual, the manufacturer 
assumes no responsibility for errors or omissions. Neither does the manufacturer assume any 
liability for damages resulting from the use of the information contained herein. The 
manufacturer reserves the right to change the specifications, functions, or circuitry of the 
product without notice. 

The manufacturer cannot accept liability for damage due to misuse of the product or due to 
any other circumstances outside the manufacturer’s control (whether environmental or 
installation related). The manufacturer shall not be responsible for any loss, damage, or injury 
arising directly, indirectly, or consequently from the use of this product. 

 

Cautions and Notes 

The following symbols are used in this guide:  

CAUTION. This indicates an important operating instruction 
that should be followed to avoid any potential damage to 

hardware or property, loss of data, or personal injury. 

 

NOTE. This indicates important information to help you make the best use of this 
product. 

Содержание RGB2VGA





















































Отзывы: