SMAR ld301, Инструкция по эксплуатации и техническому обслуживанию

Страница: 42 / 70

LD301 – Operation and Maintenance Instruction Manual
4.8
CONFIGURATION BRANCH (CONF)
Z: Moves to the TOTAL branch.
S: Enters the CONFIGURATION branch, starting with function display (LCD_1).
Display 1 (LCD_1)
Z: Moves to the function Display 2 (LCD_2).
S: Starts selection of variable to be indicated as primary display.
After activating ( S ), you can move around the options available in the following table by
activating ( Z ).
The desired variable is activated using ( S ). Escape leaves primary variable unchanged.
Display 2 (LCD_2)
Z: Moves to the RANGE function.
S: Starts selection of variable to be indicated as secondary display.
The procedure for selection is the same as for LCD_1, above.
DISPLAY LCD2/LCD1 DESCRIPTION
SP% Setpoint (%)
PV% Process Variable (%)
MV% Output (%)
ER% Error (%)
CO Current - Output (mA)
TE Sensor Temperature ( C)
SP Setpoint (Eng. unit)
PV Process Variable (eng. unit)
TO Totalization
Nothing (only LCD-2)
ESC -escape-
Table 4.3 - Display Indication
NOTA
In the transmitter mode, only the PV%, CO, TE, TO and PV may be displayed.
Besides, it is also possible to select option None for Display 2.
RANGE (RANGE)
Function Calibration (RANGE) presents the calibration options as a tree branch, as described on
Figure 4.6.
Fig. 4.6 – Local Range Tree