SMAR if303, Руководство по эксплуатации, техническому обслуживанию и инструкциям, Страница: 34 / 52

IF303 – Operation and Maintenance Instruction Manual
3.18
The window "Local Address Change" allows the user "enable/disable" the access to changing
the physical device address.
Figure 3.16 - Parameters for Local Adjustment Configuration
When the user enter into the local adjustment and rotate the parameters using the magnetic tool,
after escaping to normal operation, e.g, the monitoring, if the parameter has "Access Permission
equal to "monitoring", then this last parameter will be shown at the LCD.
Always on the LCD interface will be shown two parameters at the same time, switching between the
configured parameter at the LCD-II and the last monitoring parameter. If the user does not want to
show two parameters at the same time, it is only necessary to opt for "none" when configure the
LCD-II:
Figure 3.17 - Parameters for Local Adjustment Configuration
The user can select the "Mode Block" parameter at the LCD. In this case is necessary to select the
index equal to "Mode Block":
When the option
"enable" is
selected, the user
can change the
physical device
address.
Selecting "None",
only the last
chosen monitoring
parameter will be
shown at LCD.