SMAR fy303, Руководство по эксплуатации, техническому обслуживанию и инструкциям

Страница: 32 / 114

FY303 – Operation, Maintenance and Instructions Manual
3.6
Parameter Transducer Block Description
DIAGNOSES_STATUS
Indicates the status of diagnoses:
{ 0, "None"},
{ 2, "Output Module Not Initialized"},
{ 4, "No Valve Movement or Slow Valve Movement or Low Air Supply or No Magnet Detected"},
{ 6, "(No Valve Movement or Slow Valve Movement or Low Air Supply or No Magnet Detected)
and (Output Module Not Initialized)"},
{ 8, "Travel Limit Exceeded"},
{ 10, "Travel Limit Exceeded and Output Module Not Initialized"},
{ 12, "Travel Limit Exceeded and (No Valve Movement or Slow Valve Movement or Low Air
Supply or No Magnet Detected)"},
{ 14, "(Travel Limit Exceeded) and (No Valve Movement or Slow Valve Movement or Low Air
Supply or No Magnet Detected) and (Output
Module Not Initialized)"},
{ 16, "Temperature Out of work range"},
{ 18, "Temperature Out of work range and Output Module Not Initialized"},
{ 20, "Temperature Out of work range and (No Valve Movement or Slow Valve Movement or
Low Air Supply or No Magnet Detected)"},
{ 22, "Temperature Out of work range and (No Magnet Detected and Output Module Not
Initialized)"},
{ 24, "Travel Limit Exceeded and Temperature Out of work range"},
{ 26, "Travel Limit Exceeded and Temperature Out of work range and Output Module Not
Initialized"},
{ 28, "Travel Limit Exceeded and Temperature Out of work range and (No Valve Movement or
Slow Valve Movement or Low Air Supply or No Magnet Detected)"},
{ 30, "Travel Limit Exceeded and Temperature Out of work range and (No Valve Movement or
Slow Valve Movement or Low Air Supply or No Magnet Detected) and Output Module Not
Initialized"},
{ 32, "Output Module Not Detected"}
DIGITAL_HALL_VALUE Value and Status for Hall sensor.
HALL_COMPENSATED Value for Hall sensor after compensation of offset.
HALL_OFFSET_CONTROL
Enable and disable for offset compensation.
{0, "Disable"},
{1, "Enable"}
READ_HALL_CAL_POINT_HI The highest calibrated point for Hall sensor.
READ_HALL_CAL_POINT_LO The lowest calibrated point for Hall sensor.
DA_OUTPUT_VALUE
Value and status for DA output.
USER_DA_CAL_POINT_HI The highest calibrated point for DA output.
USER_DA_CAL_POINT_LO The lowest calibrated point for DA output.
PIEZO_ANALOG_VOLTAGE
The analog voltage for piezo.
POT_DC The value for POT DC.
MAIN_LATCH
MAIN ANALOG SWITCH USED BY HARDWARE.