Smalvic Fi 95, Инструкции по установке, использованию и обслуживанию

Страница: 56 / 68

21
REMOVING/MOUNTING THE SLIDING GUIDES (IF ANY)
If any, there are right and left sliding guides, which means they are not interchangeable on
both sides of the oven.
Proceed as follows to remove the sliding element from the lateral guide:
release the lateral guide from the oven together with the sliding element, as reported in the
paragraph above.
Place the guide on a flat surface. Now exert some pressure from top down near the couplings
in the sliding element (fig. 1 step 1). When the couplings underneath come out from the rod
of the lateral guide, the sliding element has been released and can be removed. (fig. 1 step
2).
fig. 1
To place back the sliding element, position the upper hooks on the special rods of the lateral
guide. Always make sure the sliding element is moving towards the outside of the oven when
it is taken out. Now press the sliding element downwards (fig. 2 step 1) so that it is coupled
onto the lower rods (fig2 step 2).
fig. 2