Smalvic Fi 95, Инструкции по установке, использованию и обслуживанию, Страница: 58 / 68

23
VENTILATION OF ROOMS USED
This household appliance must be installed and only function in permanently ventilated
rooms and have greater ventilation when requested by relative local Standards in force.
Such ventilation must guarantee a correct exchange of combustion gases, of air circulation
and must maintain the work temperature within the safety limits.
The flow of air in the room must
take place directly through the openings made in the external walls. These openings must
have a free passage section of at least 100 cm² such that it cannot be accidentally
obstructed.
The combustion products discharge must happen through suction hoods connected to flues
or directly to the outside.
In case it is not possible to install the suction hood, an electric blower must be applied to the
external wall or to the window of the room of use, as long as there are air inlets in the room
envisioned by the Standards in force and proportioned for the capacity of the electric blower.
The fumes discharge systems must be functioning during use of the appliance
Do not lift or pull the oven from the door handle and do not put pressure or load weights
when this is open
Installation is the responsibility of the purchaser and any interventions requested of the
manufacturing company due to an incorrect installation will not be included in the warranty
FEATURES OF THE CABINET
The cabinet has the following requisites;
- The cabinet and its components must be able to resist a temperature of
90°C without deformations and/or defects of the surface.
- The cabinet must allow the free passage of the oven connections.
- All kitchen cabinets at household level must be protected with fireproof
material according to the Standards in force.