6 9880023200-CU 36P NEUTRO 120312
TO CHANGE TIME OF DAY
Press the
button for 4 seconds until the hours display will flash.
Change the hours only by using the “+” or “-” button. The minutes and hidden
seconds will not be affected.
TO SET TIMER FUNCTION
This function will be activated with “+” button. Press “+” button again to
increase duration time.
During setting the units are in 10 seconds steps or minutes.
During count down the timer has priority on the display. The bell-symbol
illuminated. The units are in seconds or minutes in the long time section.
The maximum time is 10h. The format change will happen after 99 minutes
and 50 seconds to 1 hour and 40 minutes.
To show time of day press
button, after 6 seconds, the count down
comes back on.
TO RESET TIMER
Count down to zero by holding in the “-” button (automatic stop at zero).
SIGNAL
The signal after “time out” will stay on for 7 minutes if it has not been reset
with
button. The following signal will be skipped if time of day is
pressed during the last 15 seconds of the timer.
SIGNAL FREQUENCY
If no function is activated, the signal frequency can be selected by pressing
the “-“ button. Three different frequencies are selectable.
