14 9880023200-CU 36P NEUTRO 120312
TO REPLACE THE OVEN DOOR
1) Grasp the sides of the door at the center and insert the ends of the hinges
and fix hinge slots in the oven front frame.
2) With the door open all the way, pull-out the two Locking Pins (B) from the
hinge Locking Holes(A).
3) Raise the oven door and make sure that it fits evenly with the front sides.
WARNING:
Never take out the Locking Pins while the door is off. Do not close
the hinges without the weight of the door, the powerful springs will snap the
hinges closed with great force.
CAUTION:
Do not place excessive weight on or stand on an open oven door.
This could cause the range to tip over, break the door, or injure the user.
Also, do not attempt to open or close door or operate oven until door is
properly replaced.
■
REPLACING THE OVEN LIGHT
MOD: Oven Gas Range – Oven Dual Fuel Range
WARNING:
To prevent electrical shock and or personal injury:
1) Before replacing the light bulb, be sure the electric power is turned off at
the circuit breaker.
2) Do not operate the oven unless the light cover is securely in position.
3) Be sure the oven and light bulb are cool.
4) Do not touch hot bulb with a damp cloth as this may cause the bulb to
break.
5) If the light cover is damaged or broken, do not use the oven until a new
cover is in place.
To replace oven light bulb:
1) Before replacing light bulb, disconnect oven electric circuit.
2) Remove oven racks.
3) Remove, unscrewing, lens bulb cover and light bulb.
4) Replace bulb with a 25 W – 120 Vac appliance bulb only.
5) Replace lens bulb cover.
6) Reconnect power to range. Reset electronic clock.
