background image

If you are a new to camping and unfamiliar with setting guy ropes correctly please read this 
section carefully to ensure guys lines are setup correctly to ensure they perform optimally. Guy 
lines (otherwise called “guy ropes”) should be installed and checked regularly even on a still day. 
Always ensure all guy lines are installed and taut at all times. Use a rubber mallet to secure your 
ground pegs fully at the correct angle.

Our tents have been rigorously field and factory tested. Providing the tent has been installed 
correctly in a suitable location and guy ropes installed as below, the CUB, GOBI and GRIZZLY tents 
can withstand winds and gusts of up to 25mph (40 Kmph). The INCA 40mph (65 Kmph).

Knowing the guy line runner. It is necessary to understand the correct way to install the 
guy runner. Get it wrong will result in ineffective guy line setup, and render the guys useless. 

For illustrational purposes only, to demonstrate correct installation of the plastic guy rope 
runner:

INCORRECT:

 Loop has been pulled 

out from the same side of the knot.
This will cause the runner to slip, 
resulting in a slack line.

CORRECT:

 The loop is pulled out from the 

opposite side of the runner to the knot. This 
will ensure a taut line. Check tautness regularly.

attached to tent

Knot

Loop  (attach to 

ground peg)

Knot

Loop

Guy Line Installation

Guy Line Installation

These tents are suitable for fitting camping conditions. However, if you are caught 
out by unexpected winds or gusts, you can quickly offer additional support to the 
tent and frame by actioning the steps on page 8.

If you haven’t done so already, we would recommend investing in the Slumit 

Guy Rope Support Kit which can be ordered via our website www.slumit.co.uk

The Extra Guy Support Kit will offer additional support and stability in higher 
winds, outside what is considered fitting conditions. If you are travelling away or 
unsure what the weather may bring, the Extra Guy Support Kit is essential and 
highly recommended.

WARNING: Camping in windy conditions is not recommended, nor a pleasant 
experience and should be avoided. Wind can be extremely destructive to tents, 
potentially damaging and breaking important components, which poses several 
safety risks.

7

 

/ 20

Содержание CUB 2
























Отзывы: