STEP 1-2: Unpack the carry case and continue to fold out all the frame legs fully, whilst
keeping the mechanism central hub vertical in an up right position (pointing to the sky).
STEP 3: Only applies if you own a GOBI or GRIZZLY. If you own a CUB, proceed to
step 4. If you own an INCA, the additional roof pole is attached and connected at the
end.
Now insert the additional pole through the pole sleeve (do not connect the ends yet).
You should only need to read this through once. We would recommend allowing 10 - 15 minutes to
follow the next few steps to ensure a succesful pitch. This should be completed prior to your trip
and to help familiarise yourself with the tent and how to operate the FlashFrame™.
Pitching & Locking
Pitching & Locking
ste
p
1
ste
p
2
ste
p
3
ste
p
1
ste
p
2
ste
p
3
NB. GOBI & GRIZZLY users. Some customers choose to insert the porch pole at
the end of the pitch sequence - after the FlashFrame™ has been engaged and
locked into position.
NB. GRIZZLY 4 users. The GRIZZLY is a beast and takes one to handle one.
Due to the increased height and weight of the FlashFrame™ used, we recommend
a minimum operator height of 5’ 8” with reasonable upper body strength, other-
wise operating the mechanism may prove challenging.
TIP ! If so, and you do not have someone to hand, you may need to partially unclip
the outer-fly from the frame before operating the mechanism. Then re-clip the
outer-fly to the FlashFrame™. Doing this will reduce the weight suspended from
the FlashFrame™ during operation, making the frame lighter and easier to
handle and operate. The same technique can be applied to the CUB 2 and
GOBI 3 models. See Page 19 for full details.
3
/ 20
