DO NOT use abrasive or chemical cleaners to clean flushometers, they may dull the luster and attack the finish. Use
ONLY soap and water, and then wipe dry with a clean towel or cloth. When cleaning, protect the exposed flushometer
from any splattering of cleaner. Acids and cleaning fluids can discolor or remove chrome plating.
When further assistance is required, please
contact Sloan Technical Support at:
1-888-SLOAN-14 (1-888-756-2614).
Manufactured in the U.S.A. by Sloan Valve Company under one or more of the
following patents: 5,373,592; 5,564,460. Other Patents Pending: Permex
®
.
Prior to inserting the flex tube into the elbow fitting, ensure that
the restrictor washer has been inserted into the elbow fitting.
The restrictor washer prevents too much water from being
diverted away from the bowl. This helps ensure optimal bowl
performance, even when used with 1.28 gpf (4.8 Lpf) High-
Efficiency Toilets.
Use the 3/8” (9 mm) diameter flex tubing to connect the bottom
of the elbow fitting with the restriction washer to the tube fitting
at the wall flange. Sloan provides a 12” (305 mm) length of flex
tubing. Bend tube to fit installation and cut to appropriate length
(DO NOT CUT END WITH LABEL). Tighten compression fittings
at both ends of the flex tubing. Complete the valve installation
according to the installation instructions included with your
Sloan flushometer.
Figure 4
SLOAN • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Phone: 1.800.9.VALVE.9 or 1.847.671.4300 • Fax: 1.800.447.8329 or 1.847.671.4380 • sloan.com
© 2017 Sloan Valve Company Code No. 0816188 – Rev. 5 (12/17)
1A
2A
1B
8
3
10A
View Shown Before Bending
10B
7
9
4
5
6
1A
2B
1B
VACUUM
BREAKER
OUTLET
TUBE
ELBOW
FITTING
RESTRICTION
WASHER
½” (13 mm) NPT
FEMALE TUBE
FITTING
3/8” O.D. x 12”
(9 mm x 305 mm)
FLEX TUBING
4 - INSTALL FLEXIBLE TUBING (FIG. 4)
CARE AND CLEANING
PARTS LIST
Item No. Part No.
Description
1A
V-579
Vacuum Breaker Coupling for Royal flushometers
1B
V-553-A
Vacuum Breaker Coupling Assembly for Regal flushometers
2A
VBF-2
1½” (38 mm) x “L” Vacuum Breaker Outlet Tube (see Table 1 for length)
2B
VBF-4
1½” (38 mm) x “L” Vacuum Breaker Outlet Tube with 2” (50 mm) Offset
(see Table 1 for length)
3
F-75-AA
Assembly Kit for Trap Primer
4
F-7
Wall Flange
5
F-73-A
Tubing Fitting
6
F-75-A
Elbow Compression Fitting
7
F-76
3/8” (9 mm) x 12” (305 mm) Flexible Tubing
8
F-88
Water Deflector
9
VBF-9
Restrictor Washer
10A
V- 651-A
High Back Pressure Vacuum Breaker Repair Kit (standard with Royal flushometers)
10B
V- 551-A
Vacuum Breaker Repair Kit (standard with Regal flushometers)
The information contained in this document is subject to change without notice
