10500 Seymour Ave Franklin Park, IL 60131 | Phone: +1.847.671.4300 / +1.800.982.5839 | Fax: +1.800.447.8329 |
Copyright © 2020 Sloan. All rights reserved.
Page: 4 of 11
Installation Instructions
Code #: 0816885 Draft: 7.0 (10/20)
Initial Setup Prior to First Use
IMPORTANT
(Must be completed before initial power up and water connection)
• Use holding tank cleaner/treatment for 16 gallon waste tank.
• Sanitation of the fresh water pump (if applicable) must be completed prior to initial use.
• Batteries for the paper towel dispenser are shipped loose and must be installed prior to initial use.
• Soap bottle is shipped loose and must be installed prior to initial use.
This mobile handwashing sink has multiple options for power, water supply, and drainage. See below.
Power
• AC Power
–
Select this option when power can be supplied by an external source.
• DC Power (If applicable)
–
Select this option when external power is not available, and battery power is required.
Water Supply
• External Water Supply
–
Select this option when external water connection is available, this option can be connected via a 3/4”
garden hose.
• 5 Gallon Water Supply (If applicable)
–
Select this option when external water connection is not available, two 5 gallon water bottles (not supplied)
are required.
Drainage
• Manual (Gravity fed)
–
Select this option if no power is available to the unit. This option is controlled by a ball valve.
• Electric Pump
–
Select this option select this option if AC or DC power has been select, this option is controlled by a switch.
–
Select this option if waste needs to be pumped up hill or over a long distance.
Faucet:
• Refer to detailed EFX-150 instructions available via Sloan.com for the following:
–
Sensor calibration (If required)
Note:
Failure to properly calibrate the faucet sensor may lead to unexpected activation and increase
maintenance intervals.
–
Priming
–
Battery battery replacement
–
Care and cleaning
Soap Dispenser:
• Refer to detailed CS-8 instructions available via GOJO.com for the following:
–
Installation of replacement soap bottle and battery (Shipped together)
–
Care and cleaning
Paper Towel Dispenser:
• Refer to EnMotion manufacturer instructions for the following:
–
Installation of batteries (Included, shipped loose)
–
Paper towel installation
–
Paper length setting
–
Care and cleaning
Fresh Water Pump:
• Refer to detailed instructions available via Xylem.com for the following:
–
Sanitize unit prior to first use.
–
Routine sanitation must occur as required, minimum 6 times per year.
16 Gallon Waste Tank
• Sanitation of Grey Water Tank
–
The 16 Gallon grey water tank must be treated to break down waste and eliminate odors. Using a liquid
holding tank cleaner/treatment, follow the holding tank cleaner instructions for cleaning or treatment of grey
water holding tank. For best results, clean and flush the tank weekly regardless of the water level or usage.
Recommend using a formaldehyde-free formulation that is safe for all pipes including PVC. Routine treatment
is an important step to ensure reliable service.
