10500 Seymour Ave Franklin Park, IL 60131 | Phone: +1.847.671.4300 / +1.800.982.5839 | Fax: +1.800.447.8329 |
Copyright © 2020 Sloan. All rights reserved.
Page: 9 of 11
Installation Instructions
Code #: 0816884 Draft: 7.0 (10/20)
Draining the Waste Water Tank (Electric Pump)
Figure 7
Waste Pump
On/Off
Detail B
SEE DETAIL B
Right Side
1. Drain the waste tank (Electric Pump).
a. Make sure that waste line hose is connected to waste line out (Pump Location, Figure 3. page 5) at
the bottom rear panel of the Mobile Handwashing Sink.
b. Make sure that the opposite end of the waste line hose is in an appropriate location to drain the waste
water tank. 16 gallons minimum drainage.
c. Use the 1/4” Hex Key (Included). unlock the cam latch on the right access panel. Open the right side
access panel.
d. Locate the Main On / Off Switch and toggle to the On position.
e. Locate the Waste Pump On Off Switch and toggle to the On position.
f. Toggle Waste Pump Switch to the Off position when the waste tank is empty.
Note:
Failure to turn the waste water pump off when the tank is empty can damage the pump or cause
premature pump failure.
g. Close and latch the right access panel.
